INA bearings strives for perfection, INA bearings after-sales technical data, samples of INA bearings, INA bearing, INA bearing series, INA bearings with famous brand, INA bearing to build China's largest bearing manufacturer, INA composite roller bearing and INA support roller bearing type INA bolt roller bearing INA bearing franchisees to tianjin's INA bearings bearing company strives for perfection, INA bearing after-sales technical data, samples of INA bearings, INA bearing, INA bearing series, INA bearings with famous brand, INA bearing to build China's largest bearing manufacturer, INA composite roller bearing and INA support roller bearing type INA bolt roller bearing INA bearing franchisees to tianjin's bearing company telephone: + 86 - + 86-022-84816217 022-84812207 email: skf1114@163.com
Support type roller (roller)/bolt type roller (roller)
Yoke type rolling roller
Yoke type track roller is installed on the bolt column of single or double row unit. They contain a thick wall of the outer ring with different appearance, needle roller and cage components or full complement cylindrical or needle roller. Yoke type track roller can support; From the eccentric and dislocation running high radial load and axial load, and is suitable for the CAM transmission, slide, transportation equipment, etc. Available with or without inner ring, as well as open or closed.
Stud type track roller
Stud type track roller including thick wall of the outer ring with different appearance, with fixed roller stud positioning line, thrust washers, and maintains a component or a single or double row full complement cylindrical and needle roller. They can support from the eccentric and dislocation running high radial load and axial load, and is suitable for the CAM transmission, slide, transportation equipment, etc. Bearing can be used in a lot of design, with or without bias.
Roller bearing outer ring thicker, with single or double row roller. This kind of bearings can withstand radial load and axial load, two-way its outer surface for coronary modification or cylindrical, coronary outside surface modification is to avoid because of the roller relative to the bearing orbital tilt the edge stress. Equipped with roller bearing with or without bolt and type with plastic cover.
INA X - life roller bearing LR52 and LR53 supply now
INA X - life roller bearing LR52 and LR53 supply now. Bearing internal structure optimization design, can withstand higher radial load rating and longer life. Due to the external size unchanged, the product can directly replace the original roller bearings.
A new type of seal more efficient
At the same time also to seal for optimization design of internal to the redesign. INA LR52 and LR53 of HRS sealing ring has been adopted as standard, and provide new dust cover sealing as optional configuration. Two sealing configuration of sealing performance has greatly increased in comparison with previous generation.
HRS sealing ring
Contact sealed design innovation
Inner ring and the sealing lip axial contact
Will closely sealed within the bearing grease, exclude pollution
Without plasticizer
Z type seal
The optimization which has the function of labyrinth seal dustproof cover
Have used to seal ring and the function of the dust cover slot
Selects the steel cage and suitable grease, working temperature range can be bigger
Rolling bearings of the highest grade
The optimized LR52 and LR53 dynamic load rating increased by 10%, static load rating increased by 15%.
Comparing with competitors products rated dynamic load
The external size is unchanged
Super thick outer ring
Optimize the internal structure
Contact Angle optimization with higher load capacity
Innovation seal design and provide optimized dust cover optional configuration
Optimization of the nylon cage. Can choose strong and high rigid steel frame
Limit speed increase
在线客服